POWER
Robust 3.0 Hp Motor:
– Produces 30% more power than similar drills.
– Drills holes up to 1.5 inch (38.1 mm) diameter.
– Faster spindle speed in the cut.
– Higher metal removal rate.
– Reliably drills through tough metals like HY80 steel.
RELIABILITY
- High quality gear set is more robust than similar drills, fully supported by two bearings, and will last through years of heavy use. This results in longer run times and a longer life span for the drill.
- Integral clutch system – The PD3000 uses a clutch system rather than shear pins which prevents the drill from damaging itself in a stall condition, increases uptime, and extends the life of the drill.
- Dedicated chip wiper significantly reduces the amount of chips entering the gearbox which reduces downtime and keeps the drill in action.
- Innovative shut-off mechanism protects the drill from damage due to accumulated chips.
- Automatic retract system is self-cycling. Mount it, and push go! The depth collar determines the hole depth and automatically triggers a retract cycle. The drill retracts 10 times faster than the drill feed rate.
- Manual retract capability allows chip clearance.
- Compatible with common air feed drill bushings – the drill can be used with existing drill templates.
SAFETY
- Low pressure drop-out prevents unintended re-starts after loss of supplied air pressure.
- Compact Design make set-up, transport and storage quick and easy.
